Construction & Building Materials Testing Instruments

Our target is the in-house quality laboratory of the building materials producer. On the fire side, the two tests required for EN 13501-1 classes A1 and A2 are in our catalogue today: the EN ISO 1182 non-combustibility furnace and the EN ISO 1716 oxygen bomb calorimeter. For waterproofing membranes we supply watertightness, nail shank tear and cold bending; for vapour control layers and insulation, water vapour transmission; for floor coverings, burning, loading and wear; for facades and exterior wood coatings, UV ageing instruments.

Instruments in our catalogue

16 instruments

TXL-YAN-013

Non-Combustibility Test Furnace for Building Materials

TXL-YAN-014

Oxygen Bomb Calorimeter (Building Materials, Coal and Coke)

TXL-YAN-008

Carpet Flammability Tester

TXL-MBR-003

EN 1928 Waterproofing Impermeability Tester

TXL-MBR-004

EN 12310-1 Nail-Shank Tear Test Fixture

TXL-MBR-001

CryoBend — Cold Bending Tester

TXL-MBR-005

Automatic Weighing Water Vapour Transmission Rate Tester (WVTR-06A)

TXL-MBR-006

External Balance Water Vapour Transmission Rate Tester (WVTR-08E)

TXL-MBR-002

Water Vapour Transmission Rate Tester (WVTR-01A)

TXL-GEN-002

UV Weathering / Ageing Tester

TXL-HAL-005

Static Load Compression Tester

TXL-HAL-006

Dynamic Load / Cyclic Compression Tester

TXL-HAL-003

Hexapod Tumble Tester (1 / 3 / 6 stations)

TXL-HAL-009

Carpet Thickness Gauge

TXL-NEM-005

Climatic Conditioning Chamber

TXL-GEN-003

Laboratory Drying Oven

Not supplied

• EN 13823 SBI single burning item rig — not supplied
• EN ISO 11925-2 single-flame source ignitability test — not supplied
• EN ISO 9239-1 flooring radiant panel and ISO 5660 cone calorimeter — not supplied
• Fire resistance furnaces (ISO 834, EN 1363) — not supplied
• Concrete, cement and steel mechanical tests (compression press, EN 196, EN 12390) — not supplied; our universal tester goes up to 5 kN
• Thermal conductivity (EN 12667) and acoustic measurements — not supplied
• Classification: the EN 13501-1 class and CE marking are granted on a notified body's report; we manufacture instruments, we do not issue certificates of conformity