Climatic Conditioning Chamber

İklim Koşullandırma Kabini

Conditioning chamber at standard conditions (20°C±2 / 65%RH±4). Instantly and accurately detects moisture and temperature controls, which are critically important for sensitive production environments. Offers portable and practical use.

Model technical data

The interior is made from stainless steel.

Physical specifications and utilities

Electrical supply	Approx. 220–240 V AC, 50/60 Hz, single phase; build-dependent.
Power / connected load	Approx. 1500–3500 W connected load for preliminary planning.
Overall instrument dimensions	Approx. 900 × 850 × 1800 mm (W × D × H).
Instrument weight	Approx. 130–250 kg net.
Gross / shipping weight	Approx. 168–337.5 kg gross; estimated packing allowance.
Lab requirements	Ventilated installation; purified water and drain for humidification options. Separate conditioning plant depends on order scope.

Dimension order and approximate values are stated in each row. Packaging data are separate from instrument dimensions and net mass. Approx. rows are preliminary engineering estimates based on comparable equipment and function/capacity; they are not verified manufacturing measurements or standard requirements. Installation and shipment are finalised against the approved drawing and nameplate. Estimate scope: base product / one unit; external computer, bench and auxiliary plant excluded.

Specifications, dimensions, and power requirements are approximate and subject to change without prior notice for continuous design improvements.

Product technical specifications and images may vary according to manufacturing conditions and applicable standards.

Test and configuration

Measured output / function: Specimen conditioning at controlled temperature and relative humidity
Parameters selected for the method: Target temperature, relative humidity, load and conditioning time
Verification points: Temperature-humidity mapping and temporal stability

Listed methods are application references. Suitability is established by assessing the selected hardware, current method and calibration together.

Test parameters for the reviewed method

Values belong to the stated source edition. Test recipe, fixture and delivered instrument configuration are selected together.

ASTM D1776-98e1 · 6.1, Table 1

Table: general textiles at 21 ± 1 °C and 65 ±2% RH; nonwovens at 23 ± 1 °C and 50 ±2% RH. Record chamber temperature and humidity; keep these conditions separate from the ISO 139 recipe.

ISO 139:2005 + Amd 1:2011 · 3-5, Annex A

Standard atmosphere 20 °C / 65% RH; agreed alternatives 23 °C / 50% RH or 27 °C / 65% RH, tolerances ±2 °C and ±4% RH. Recommended monitor resolution 0.1 °C and 0.1% RH or better; measurement uncertainty ±0.5 °C and ±2% RH or better. Assess monitoring sensors separately from control sensors.

Control and recording specification

The following are method-specific software/recording requirements; delivered software modules are defined by the order scope.

Method code and edition, specimen ID, operator and selected test parameters are linked to the record.
The calculation and endpoint are defined by the selected method edition; instrument signals and operator assessments are kept distinct.
Raw measurements, units, valid/invalid test flags and the reported result remain traceable.
Calculations are checked against known inputs and an independent calculation; sensor channels are checked against calibration values.

Download the technical brochure (PDF)Revision: 27 October 2026