Photographs have been adapted for the website; dimensions may vary.
Textile Moisture Meter (Aquaboy)
İplik Kumaş Nem Ölçer (Aquaboy)
Portable fast digital moisture meter. 17 material scales. Instantly and accurately detects moisture and temperature controls, which are critically important for sensitive production environments. Offers portable and practical use.
Model technical data
- Roller Electrode 25 mm.
- Stab Electrode 100 mm.
Physical specifications and utilities
| Electrical supply | Approx. battery / rechargeable battery; voltage and charger depend on build. |
|---|---|
| Power / connected load | Approx. 1–5 W connected load for preliminary planning. |
| Overall instrument dimensions | Approx. 120 × 80 × 250 mm (W × D × H). |
| Instrument weight | Approx. 0.5–1.5 kg net. |
| Gross / shipping weight | Approx. 1–2.3 kg gross; estimated packing allowance. |
| Lab requirements | Level, stable working surface; specimen conditioning follows the selected method. |
Dimension order and approximate values are stated in each row. Packaging data are separate from instrument dimensions and net mass. Approx. rows are preliminary engineering estimates based on comparable equipment and function/capacity; they are not verified manufacturing measurements or standard requirements. Installation and shipment are finalised against the approved drawing and nameplate. Estimate scope: base product / one unit; external computer, bench and auxiliary plant excluded.
Specifications, dimensions, and power requirements are approximate and subject to change without prior notice for continuous design improvements.
Product technical specifications and images may vary according to manufacturing conditions and applicable standards.
Test and configuration
- Measured output / function
- Material- and method-dependent moisture/mass loss (%)
- Parameters selected for the method
- Material calibration or drying temperature and endpoint
- Verification points
- Reference moisture method, weighing and temperature
Listed methods are application references. Suitability is established by assessing the selected hardware, current method and calibration together.
Test parameters for the reviewed method
Values belong to the stated source edition. Test recipe, fixture and delivered instrument configuration are selected together.
ASTM D2495-01 · 3.1.4, 6.1–6.2
- Cotton moisture determination uses a forced-ventilation oven at 105 ±2 °C and a balance with 0.01 g sensitivity. Moisture content is based on initial moist mass, distinct from dry-mass moisture regain. Control moisture uptake after oven removal.
ISO 6741-3:1987, part 3 only · 1, 4, 5.1
- Only part 3's specimen-cleaning clauses of the ISO 6741 family were reviewed. Clean-dry commercial mass requires fibre-specific washing/extraction with separate equipment before drying; omit cleaning for dry-only mass. The moisture instrument alone does not perform the entire family method.
Control and recording specification
The following are method-specific software/recording requirements; delivered software modules are defined by the order scope.
- Method code and edition, specimen ID, operator and selected test parameters are linked to the record.
- The calculation and endpoint are defined by the selected method edition; instrument signals and operator assessments are kept distinct.
- Raw measurements, units, valid/invalid test flags and the reported result remain traceable.
- Calculations are checked against known inputs and an independent calculation; sensor channels are checked against calibration values.
Test standards
Prices start from €18. Request the technical specification and a quotation for this instrument.
Request a quoteCall usPDF catalogue
