Photographs have been adapted for the website; dimensions may vary.
Moisture Analyser (Halogen Balance)
Nem Tayin Cihazı (Halogen Terazi)
Halogen-heated precision moisture determination. Instantly and accurately detects moisture and temperature controls, which are critically important for sensitive production environments. Offers portable and practical use.
Model technical data
- Product has a capacity of 90 g allowing for analysis of larger sample sizes.
- Ideal for food, agriculture, chemical, pharmaceutical and other applications that require measurements up to 0.01% 0.001 g.
Physical specifications and utilities
| Electrical supply | Approx. 220–240 V AC, 50/60 Hz, single phase; build-dependent. |
|---|---|
| Power / connected load | Approx. 400–600 W connected load for preliminary planning. |
| Overall instrument dimensions | Approx. 250 × 450 × 350 mm (W × D × H). |
| Instrument weight | Approx. 5–8 kg net. |
| Gross / shipping weight | Approx. 7.5–12 kg gross; estimated packing allowance. |
| Lab requirements | Heat-resistant bench and ventilation; clearance for hot surfaces. |
Dimension order and approximate values are stated in each row. Packaging data are separate from instrument dimensions and net mass. Approx. rows are preliminary engineering estimates based on comparable equipment and function/capacity; they are not verified manufacturing measurements or standard requirements. Installation and shipment are finalised against the approved drawing and nameplate. Estimate scope: base product / one unit; external computer, bench and auxiliary plant excluded.
Specifications, dimensions, and power requirements are approximate and subject to change without prior notice for continuous design improvements.
Product technical specifications and images may vary according to manufacturing conditions and applicable standards.
Test and configuration
- Measured output / function
- Material- and method-dependent moisture/mass loss (%)
- Parameters selected for the method
- Material calibration or drying temperature and endpoint
- Verification points
- Reference moisture method, weighing and temperature
Listed methods are application references. Suitability is established by assessing the selected hardware, current method and calibration together.
Test parameters for the reviewed method
Values belong to the stated source edition. Test recipe, fixture and delivered instrument configuration are selected together.
ISO 6741-3:1987, part 3 only · 1, 4, 5.1
- Only part 3's specimen-cleaning clauses of the ISO 6741 family were reviewed. Clean-dry commercial mass requires fibre-specific washing/extraction with separate equipment before drying; omit cleaning for dry-only mass. The moisture instrument alone does not perform the entire family method.
Control and recording specification
The following are method-specific software/recording requirements; delivered software modules are defined by the order scope.
- Method code and edition, specimen ID, operator and selected test parameters are linked to the record.
- The calculation and endpoint are defined by the selected method edition; instrument signals and operator assessments are kept distinct.
- Raw measurements, units, valid/invalid test flags and the reported result remain traceable.
- Calculations are checked against known inputs and an independent calculation; sensor channels are checked against calibration values.
Test standards
Prices start from €18. Request the technical specification and a quotation for this instrument.
Request a quoteCall usPDF catalogueMore in this category
Textile Moisture Meter (Aquaboy)
Temperature & Humidity Datalogger
Sling Psychrometer
Climatic Conditioning Chamber
Related equipment for moisture analysis
TXL-NEM-002 is a halogen-balance moisture analyser. Material moisture measurement and ambient temperature-humidity recording serve different purposes. Review the technical table and product brochure above for the method and instrument configuration suited to your specimen.