Photographs have been adapted for the website; dimensions may vary.
Electronic Pipette
Elektronik Pipet
Automatic electronic pipettes. Single and multi-channel. A functional device that meets the basic needs of every textile laboratory, offering regular and flexible operation capabilities.
Model technical data
- Function: delivery of a set liquid volume using electronic piston control.
- Configuration: volume range, setting increment and channel count are specified with the selected model.
- Tip selection: volume verification is performed on the complete pipette and compatible-tip system.
- Record: set volume, replicate measurements, systematic error and repeatability are recorded.
Physical specifications and utilities
| Electrical supply | Approx. battery / rechargeable battery; voltage and charger depend on build. |
|---|---|
| Power / connected load | Approx. 1–5 W connected load for preliminary planning. |
| Overall instrument dimensions | Approx. 60 × 50 × 300 mm (W × D × H). |
| Instrument weight | Approx. 0.1–0.3 kg net. |
| Gross / shipping weight | Approx. 0.5–0.8 kg gross; estimated packing allowance. |
| Lab requirements | Level, stable working surface; specimen conditioning follows the selected method. |
Dimension order and approximate values are stated in each row. Packaging data are separate from instrument dimensions and net mass. Approx. rows are preliminary engineering estimates based on comparable equipment and function/capacity; they are not verified manufacturing measurements or standard requirements. Installation and shipment are finalised against the approved drawing and nameplate. Estimate scope: base product / one unit; external computer, bench and auxiliary plant excluded.
Specifications, dimensions, and power requirements are approximate and subject to change without prior notice for continuous design improvements.
Product technical specifications and images may vary according to manufacturing conditions and applicable standards.
Test and configuration
- Measured output / function
- Dispensing a set liquid volume (µl or ml)
- Parameters selected for the method
- Volume range, channel count and tip compatibility
- Verification points
- Gravimetric volume verification
Listed methods are application references. Suitability is established by assessing the selected hardware, current method and calibration together.
Control and recording specification
The following are method-specific software/recording requirements; delivered software modules are defined by the order scope.
- The need for integrated software depends on the method and selected hardware; manual instruments use an external test record.
- Method code and edition, specimen ID, operator and selected test parameters are linked to the record.
- The calculation and endpoint are defined by the selected method edition; instrument signals and operator assessments are kept distinct.
- Raw measurements, units, valid/invalid test flags and the reported result remain traceable.
- Calculations are checked against known inputs and an independent calculation; sensor channels are checked against calibration values.
Prices start from €18. Request the technical specification and a quotation for this instrument.
Request a quoteCall usPDF catalogue
