Photographs have been adapted for the website; dimensions may vary.
Temperature Indicator Strips (Thermostrip)
Sıcaklık Göstergesi (Thermostrip)
Single-use temperature strips that indicate surface temperature through irreversible colour changes at defined thresholds. The measuring range depends on the selected strip.
Model technical data
- Function: monitoring the temperature reached at the contacted surface using an indicator strip.
- Measurement configuration: temperature steps and range are specified for the selected strip type.
- Use: surface contact and dwell time are matched to the strip supply specification.
Physical specifications and utilities
| Electrical supply | Manual / passive base apparatus; no mains supply assumed. |
|---|---|
| Power / connected load | Approx. 0 W connected load for preliminary planning. |
| Overall instrument dimensions | Approx. 150 × 100 × 20 mm (W × D × H). |
| Instrument weight | Approx. 0.02–0.1 kg net. |
| Gross / shipping weight | Approx. 0.4–0.5 kg gross; estimated packing allowance. |
| Lab requirements | Level, stable working surface; specimen conditioning follows the selected method. |
Dimension order and approximate values are stated in each row. Packaging data are separate from instrument dimensions and net mass. Approx. rows are preliminary engineering estimates based on comparable equipment and function/capacity; they are not verified manufacturing measurements or standard requirements. Installation and shipment are finalised against the approved drawing and nameplate. Estimate scope: one scale or small consumable pack; varies with pack quantity.
Specifications, dimensions, and power requirements are approximate and subject to change without prior notice for continuous design improvements.
Product technical specifications and images may vary according to manufacturing conditions and applicable standards.
Test and configuration
- Measured output / function
- Indication of temperature reached at the contact surface
- Parameters selected for the method
- Indicator range, increments and contact time
- Verification points
- Batch certificate and reference temperature comparison
Listed methods are application references. Suitability is established by assessing the selected hardware, current method and calibration together.
Control and recording specification
The following are method-specific software/recording requirements; delivered software modules are defined by the order scope.
- The need for integrated software depends on the method and selected hardware; manual instruments use an external test record.
- Method code and edition, specimen ID, operator and selected test parameters are linked to the record.
- The calculation and endpoint are defined by the selected method edition; instrument signals and operator assessments are kept distinct.
- Raw measurements, units, valid/invalid test flags and the reported result remain traceable.
- Calculations are checked against known inputs and an independent calculation; sensor channels are checked against calibration values.
Prices start from €18. Request the technical specification and a quotation for this instrument.
Request a quoteCall usPDF catalogue
