Photographs have been adapted for the website; dimensions may vary.
Precision Tumble Dryer
Hassas Tamburlu Kurutucu
TLI-TexLabInstruments Precision Tumble Dryer provides ideal drying conditions for textile dimensional stability and appearance testing. Features bidirectional drum rotation for homogeneous drying. Models equipped with Selecta control and humidity control options. Model options: T4250 (250L, 11kg/cycle), T3190 (190L, 7.5kg/cycle, bidirectional drum), T2130 (130L, 5.5kg/cycle). Compliant with ISO 6330 and AATCC 135.
Model technical data
- Dedicated drying programs for standard additional programs for normal bulk drying. Stainless steel front & stainless steel drum.
Physical specifications and utilities
| Electrical supply | Approx. 220–240 V AC, 50/60 Hz, single phase; build-dependent. |
|---|---|
| Power / connected load | Approx. 2500–3500 W connected load for preliminary planning. |
| Overall instrument dimensions | Approx. 650 × 650 × 900 mm (W × D × H). |
| Instrument weight | Approx. 45–65 kg net. |
| Gross / shipping weight | Approx. 74.5–106.2 kg gross; estimated packing allowance. |
| Lab requirements | Suitable ventilation / process exhaust; external fan and duct loads are excluded from this preliminary estimate. |
Dimension order and approximate values are stated in each row. Packaging data are separate from instrument dimensions and net mass. Approx. rows are preliminary engineering estimates based on comparable equipment and function/capacity; they are not verified manufacturing measurements or standard requirements. Installation and shipment are finalised against the approved drawing and nameplate. Estimate scope: base product / one unit; external computer, bench and auxiliary plant excluded.
Specifications, dimensions, and power requirements are approximate and subject to change without prior notice for continuous design improvements.
Product technical specifications and images may vary according to manufacturing conditions and applicable standards.
Test and configuration
- Measured output / function
- Dimensional change after specified drying (%)
- Parameters selected for the method
- Drying procedure, load and endpoint
- Verification points
- Drying temperature and timer
Listed methods are application references. Suitability is established by assessing the selected hardware, current method and calibration together.
Test parameters for the reviewed method
Values belong to the stated source edition. Test recipe, fixture and delivered instrument configuration are selected together.
AATCC 135-2004 · 5.8, 6.2, 9
- Dimensional change includes the option of three 250 mm length and width benchmark pairs on a 380 × 380 mm specimen. Measurement step 0.5% or smaller; change is 100 × (final - initial)/initial, with shrinkage negative. Match machine type/program separately to the edition.
ISO 6330:2012 / TS EN ISO 6330:2012 · 5.1–5.2, 5.6, 6.1.1
- Distinguish washer A horizontal/front-loading, B vertical/agitator and C vertical/pulsator. Match dryer type, ballast and detergent; this edition restricts reference detergent 1 to type B. Record machine type and program edition before assuming method equivalence.
Control and recording specification
The following are method-specific software/recording requirements; delivered software modules are defined by the order scope.
- Method code and edition, specimen ID, operator and selected test parameters are linked to the record.
- Dimensional change (%) = 100 × (final - initial dimension) / initial dimension; direction and sign convention are stated in the report.
- Raw measurements, units, valid/invalid test flags and the reported result remain traceable.
- Calculations are checked against known inputs and an independent calculation; sensor channels are checked against calibration values.
Test standards
Prices start from €18. Request the technical specification and a quotation for this instrument.
Request a quoteCall usPDF catalogue
