ISO 13937-3 testing instrument
Textiles — Tear properties of fabrics — Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
ISO 13937-3 testing is performed with the Fabric Tensile Strength Tester, built by TexLab Instruments in its own Istanbul workshop. Below are the 1 instruments in our catalogue that test to this standard; open an instrument for specifications and a quote.
About the standard
| Code | ISO 13937-3 |
|---|---|
| Official title | Textiles — Tear properties of fabrics — Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) |
| Published by | ISO (International Organization for Standardization) |
| Also written as | EN ISO 13937-3, BS EN ISO 13937-3, TS EN ISO 13937-3, DIN EN ISO 13937-3 |
| Source | iso.org |
Other standards tested on the same instrument
NEXT TM 16 · ASTM D2212 · ISO 11644 · ASTM D2261 · ISO 13937-4 · ASTM D2724 · ASTM D5034 · ISO 5081 · ASTM D5587 · ISO 13937-2 · ASTM D5735 · ISO 4674-1 · ASTM D5035 · ISO 13934-1 · ISO 13934-2 · ISO 13935-1 · ASTM D5822 · EN 14704-1 · NEXT TM 36 · ISO 3376 · NEXT TM 27 · NEXT TM 25 · BS 3424-5
FAQ
What is ISO 13937-3?
ISO 13937-3 is the ISO (International Organization for Standardization) test standard "Textiles — Tear properties of fabrics — Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)".
Which instrument is used for ISO 13937-3 testing?
ISO 13937-3 testing is performed with the Fabric Tensile Strength Tester, manufactured in Istanbul by TexLab Instruments.