Photographs have been adapted for the website; dimensions may vary.
NF P 92-505 Dripping Test Apparatus
NF P 92-505 Damlama Test Cihazı
A complementary reaction-to-fire apparatus for evaluating dripping from thermally melting materials. Used when assessing the M classification after the main or flame persistency test.
Model technical data
- Dripping under heat and ignition of the indicator
- Heat source, specimen holder and drip collector/indicator
Physical specifications and utilities
| Electrical supply | Approx. 220–240 V AC, 50/60 Hz, single phase; build-dependent. |
|---|---|
| Power / connected load | Approx. 500–1200 W connected load for preliminary planning. |
| Overall instrument dimensions | Approx. 700 × 650 × 1300 mm (W × D × H). |
| Instrument weight | Approx. 35–70 kg net. |
| Gross / shipping weight | Approx. 63.5–112.5 kg gross; estimated packing allowance. |
| Lab requirements | Suitable ventilation / process exhaust; external fan and duct loads are excluded from this preliminary estimate. |
Dimension order and approximate values are stated in each row. Packaging data are separate from instrument dimensions and net mass. Approx. rows are preliminary engineering estimates based on comparable equipment and function/capacity; they are not verified manufacturing measurements or standard requirements. Installation and shipment are finalised against the approved drawing and nameplate. Estimate scope: base product / one unit; external computer, bench and auxiliary plant excluded.
Specifications, dimensions, and power requirements are approximate and subject to change without prior notice for continuous design improvements.
Product technical specifications and images may vary according to manufacturing conditions and applicable standards.
Test and configuration
- Measured output / function
- Dripping under heat and ignition of the indicator
- Parameters selected for the method
- Heat source, specimen holder and drip collector/indicator
- Verification points
- Burner/gas flow, geometry and timing
Listed methods are application references. Suitability is established by assessing the selected hardware, current method and calibration together.
Control and recording specification
The following are method-specific software/recording requirements; delivered software modules are defined by the order scope.
- Method code and edition, specimen ID, operator and selected test parameters are linked to the record.
- The calculation and endpoint are defined by the selected method edition; instrument signals and operator assessments are kept distinct.
- Raw measurements, units, valid/invalid test flags and the reported result remain traceable.
- Calculations are checked against known inputs and an independent calculation; sensor channels are checked against calibration values.
Test standards
Prices start from €18. Request the technical specification and a quotation for this instrument.
Request a quoteCall usPDF catalogue
