Photographs have been adapted for the website; dimensions may vary.
Fabric Extensometer
Kumaş Ekstensiyometre
A mechanical extensiometer for evaluating fabric extension under load and recovery after unloading. Supplied with a specimen marking template and marking pen.
Model technical data
- Used to determine the recovery of fabrics after tension.
- Supplied with a marking template and marking pen.
Physical specifications and utilities
| Electrical supply | Approx. 220–240 V AC, 50/60 Hz, single phase; build-dependent. |
|---|---|
| Power / connected load | Approx. 50–200 W connected load for preliminary planning. |
| Overall instrument dimensions | Approx. 1100 × 400 × 500 mm (W × D × H). |
| Instrument weight | Approx. 15–35 kg net. |
| Gross / shipping weight | Approx. 26.5–53.8 kg gross; estimated packing allowance. |
| Lab requirements | Level, stable working surface; specimen conditioning follows the selected method. |
Dimension order and approximate values are stated in each row. Packaging data are separate from instrument dimensions and net mass. Approx. rows are preliminary engineering estimates based on comparable equipment and function/capacity; they are not verified manufacturing measurements or standard requirements. Installation and shipment are finalised against the approved drawing and nameplate. Estimate scope: base product / one unit; external computer, bench and auxiliary plant excluded.
Specifications, dimensions, and power requirements are approximate and subject to change without prior notice for continuous design improvements.
Product technical specifications and images may vary according to manufacturing conditions and applicable standards.
Test and configuration
- Measured output / function
- Extension and recovery (%)
- Parameters selected for the method
- Preload, gauge length, loading/dwell and recovery time
- Verification points
- Length, load and duration
Listed methods are application references. Suitability is established by assessing the selected hardware, current method and calibration together.
Test parameters for the reviewed method
Values belong to the stated source edition. Test recipe, fixture and delivered instrument configuration are selected together.
EN 14704-2:2007 · 9.1-9.2.3
- Static Method B first determines elongation in both directions under 30 ± 1 N. Frame width 100 mm; select frame length and distension from directional elongations. A separate CRE machine is required for the preliminary test.
Control and recording specification
The following are method-specific software/recording requirements; delivered software modules are defined by the order scope.
- Method code and edition, specimen ID, operator and selected test parameters are linked to the record.
- The calculation and endpoint are defined by the selected method edition; instrument signals and operator assessments are kept distinct.
- Raw measurements, units, valid/invalid test flags and the reported result remain traceable.
- Calculations are checked against known inputs and an independent calculation; sensor channels are checked against calibration values.
Test standards
Prices start from €18. Request the technical specification and a quotation for this instrument.
Request a quoteCall usPDF catalogue
