Photographs have been adapted for the website; dimensions may vary.
Colour Assessment Quality Control Station (K002-WS)
Kalite Kontrol İstasyonu — Renk Değerlendirme (K002-WS)
Freestanding colour assessment station for print, packaging and larger surfaces. Overhead illumination, a large viewing deck inclined at 15°, keyboard/monitor mounting drawer and lower storage cupboard in one unit; selectable D50, D65, TL84 and UV-A Black Light sources, touchscreen panel and electronic operating-hour tracking. 120 and 150 cm models.
Model technical data
- Models: K002-WS-120 and K002-WS-150; freestanding station.
- Viewing area: K002-WS-120 1242 × 775 × 1134 mm; K002-WS-150 1542 × 775 × 1134 mm; viewing deck inclined at 15°.
- Light sources: selectable D50, D65, TL84 and UV-A Black Light; UV-component control with D50/D65 and UV-only operation.
- Control: touchscreen panel and electronic operating-hour tracking.
- Keyboard/monitor mounting drawer and lower storage cupboard.
- The 15° station deck is distinct from the separate 45° table used in light booths.
Physical specifications and utilities
| Electrical supply | Approx. 220–240 V AC, 50/60 Hz, single phase; build-dependent. |
|---|---|
| Power / connected load | Approx. 150–400 W connected load for preliminary planning. |
| Overall instrument dimensions | External dimensions (W × D × H): K002-WS-120 1322 × 900 × 2220 mm; K002-WS-150 1622 × 900 × 2220 mm. |
| Instrument weight | Approx. 120–220 kg net; by model. |
| Gross / shipping weight | Approx. 170–300 kg gross; estimated packing allowance. |
| Lab requirements | Level, load-bearing floor; ceiling clearance for the 2220 mm instrument height; computer/monitor separate. |
Dimension order and approximate values are stated in each row. Packaging data are separate from instrument dimensions and net mass. Approx. rows are preliminary engineering estimates based on comparable equipment and function/capacity; they are not verified manufacturing measurements or standard requirements. Installation and shipment are finalised against the approved drawing and nameplate. Estimate scope: base product / one unit; external computer, bench and auxiliary plant excluded.
Specifications, dimensions, and power requirements are approximate and subject to change without prior notice for continuous design improvements.
Product technical specifications and images may vary according to manufacturing conditions and applicable standards.
All light cabinet models, light sources and FAQ →
Test and configuration
- Measured output / function
- Visual colour comparison under controlled illumination
- Parameters selected for the method
- Light source, UV component, viewing geometry and specimen arrangement
- Verification points
- Spectral distribution, illuminance and source operating hours
Listed methods are application references. Suitability is established by assessing the selected hardware, current method and calibration together.
Control and recording specification
The following are method-specific software/recording requirements; delivered software modules are defined by the order scope.
- Method code and edition, specimen ID, operator and selected test parameters are linked to the record.
- The calculation and endpoint are defined by the selected method edition; instrument signals and operator assessments are kept distinct.
- Raw measurements, units, valid/invalid test flags and the reported result remain traceable.
- Calculations are checked against known inputs and an independent calculation; sensor channels are checked against calibration values.
Test standards
- ISO 3664 Graphic technology and photography — Viewing conditions
- ASTM D1729 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
- ISO 3668
- AATCC EP9
Prices start from €18. Request the technical specification and a quotation for this instrument.
Request a quoteCall usPDF catalogue
