Photographs have been adapted for the website; dimensions may vary.
Yarn Inspection Board & Wrap Reel
İplik İnceleme & Konik Levha
Conical board system for visual control and evenness analysis. Provides high-precision data flow in yarn production and R&D processes. Its ergonomic structure facilitates daily routine tests.
Model technical data
- The conical black or white board is used to detect unevenness, hairiness and other faults by winding the yarn at set intervals.
Physical specifications and utilities
| Electrical supply | Approx. 220–240 V AC, 50/60 Hz, single phase; build-dependent. |
|---|---|
| Power / connected load | Approx. 50–150 W connected load for preliminary planning. |
| Overall instrument dimensions | Approx. 950 × 400 × 600 mm (W × D × H). |
| Instrument weight | Approx. 15–30 kg net. |
| Gross / shipping weight | Approx. 26.5–47.5 kg gross; estimated packing allowance. |
| Lab requirements | Level, stable working surface; specimen conditioning follows the selected method. |
Dimension order and approximate values are stated in each row. Packaging data are separate from instrument dimensions and net mass. Approx. rows are preliminary engineering estimates based on comparable equipment and function/capacity; they are not verified manufacturing measurements or standard requirements. Installation and shipment are finalised against the approved drawing and nameplate. Estimate scope: base product / one unit; external computer, bench and auxiliary plant excluded.
Specifications, dimensions, and power requirements are approximate and subject to change without prior notice for continuous design improvements.
Product technical specifications and images may vary according to manufacturing conditions and applicable standards.
Test and configuration
- Measured output / function
- Sample-card preparation or yarn appearance examination
- Parameters selected for the method
- Winding pitch, tension, board and assessment conditions
- Verification points
- Winding pitch and visual reference
Listed methods are application references. Suitability is established by assessing the selected hardware, current method and calibration together.
Test parameters for the reviewed method
Values belong to the stated source edition. Test recipe, fixture and delivered instrument configuration are selected together.
ASTM D2255-96 · 5.1, 7.1–7.2
- Compare yarn wound on black boards with the appropriate one of six photographic count series, using appearance grades A–D. Record winding, reference series, lighting and observer grade; the winding device alone does not measure an automatic appearance grade.
Control and recording specification
The following are method-specific software/recording requirements; delivered software modules are defined by the order scope.
- Method code and edition, specimen ID, operator and selected test parameters are linked to the record.
- The calculation and endpoint are defined by the selected method edition; instrument signals and operator assessments are kept distinct.
- Raw measurements, units, valid/invalid test flags and the reported result remain traceable.
- Calculations are checked against known inputs and an independent calculation; sensor channels are checked against calibration values.
Test standards
Prices start from €18. Request the technical specification and a quotation for this instrument.
Request a quoteCall usPDF catalogue
